D-Link DHP-W307AV User Manual - Page 36
LAN Setup - Static IP, Static IP
View all D-Link DHP-W307AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Section 3 - Configuration LAN Setup - Static IP Select Static IP to manually enter the IP address, subnet mask, and default gateway addresses. LAN Connection Type: Select Static IP from the drop-down menu. IP Address: Enter the IP address of the access point. The default IP address is 192.168.0.50. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to return to the configuration utility. Subnet Mask: Enter the Subnet Mask. Default Gateway: Enter the Gateway. This is usually the LAN or internal IP address of your router. Device Name: Enter the Device Name of the AP. It is recommended that you change the Device Name if there is more than one D-Link device within the subnet. You can enter the device name of the AP into your web browser to access it instead of IP address for configuration. If you are using the device name to connect, make sure that your PC and your DHP-W306AV are on the same network. D-Link DHP-W307AV User Manual 36