D-Link DPG-2000W Product Manual - Page 38

Reset to Factory Defaults The hardware reset button is located at the back of the DPG-2000W. You can use a bent paper clip to access the hardware reset button. The main function of the hardware-reset button is to reboot the DPG-2000W. To reboot the DPG-2000W, only a light tap on the reset button is required. Push Reset To reset the DPG-2000W back to the factory default settings, follow the steps below: 1. Turn on or reboot the DPG-2000W. 2. During the boot-up screen, wait for a "Reset to factory default" timer starts message to appear. Tap on the hardware reset button or power cycle to reboot the DPG-2000W before the timer ends (10 seconds), and the DPG-2000W will revert back to factory default settings. 4. During the next boot-up screen, a Reset to Factory Default message should appear next to the Timer message, indicating a successful hardware reset. Warning Please note that resetting the DPG-2000W to its factory default settings will erase all configurations and encryption information you may have set through the web interface. 38