D-Link DWS-4026 Product Manual - Page 143

Software User Manual 12/10/09 D-Link Unified Access System Field File Type Image Name Transfer Mode TFTP Server Address Type TFTP Server Address TFTP File Path TFTP File Name Start File Transfer Table 62: Download File to Switch Fields Description Specify what type of file you want to download to the switch: • CLI Banner: The CLI banner is the text that displays in the command-line interface before the login prompt. The CLI banner to download is a text file and displays when a user connects to the switch by using telnet, SSH, or a serial connection. • Code: The code is the system software image, which is saved in one of two flash sectors called images (image1 and image2). The active image stores the active copy; while the other image stores a second copy. The device boots and runs from the active image. If the active image is corrupt, the system automatically boots from the non-active image. This is a safety feature for faults occurring during the boot upgrade process. • Configuration: If you have a copy of a valid binary configuration file (fastpath.cfg) on a TFTP server, you can download it to the switch. • Text Configuration: A text-based configuration file enables you to edit a configured text file (startup-config) offline as needed without having to translate the contents for the D-Link software to understand. The most common usage of text-based configuration is to upload a working configuration from a device, edit it offline to personalize it for another similar device (i.e., change the device name, serial number, IP address, etc.), and download it to that device. • SSH-1 RSA Key File: SSH-1 Rivest-Shamir-Adleman (RSA) Key File. To download SSH key files, SSH must be administratively disabled and there can be no active SSH sessions. • SSH-2 RSA Key PEM File: SSH-2 Rivest-Shamir-Adleman (RSA) Key File (PEM Encoded). To download SSH key files, SSH must be administratively disabled and there can be no active SSH sessions. • SSH-2 DSA Key PEM File: SSH-2 Digital Signature Algorithm (DSA) Key File (PEM Encoded). To download SSH key files, SSH must be administratively disabled and there can be no active SSH sessions. • SSL Trusted Root Certificate PEM File: SSL Trusted Root Certificate File (PEM Encoded). • SSL Server Certificate PEM File: SSL Server Certificate File (PEM Encoded). • SSL DH Weak Encryption Parameter PEM File: SSL Diffie-Hellman Weak Encryption Parameter File (PEM Encoded). • SSL DH Strong Encryption Parameter PEM File: SSL Diffie-Hellman Strong Encryption Parameter File (PEM Encoded). Specify the code image you want to download, either image1 or image2. This field is only visible when Code is selected as the File Type. The factory default is image1. Specifies the protocol to be used for the transfer: TFTP, SFTP, or SCP. Specify either IPv4,IPv6, or DNS address to indicate the format of the TFTP Server Address field. The factory default is IPv4. Enter the IP address of the TFTP server in accordance with the format indicated by the TFTP Server Address Type. The factory default is the IPv4 address 0.0.0.0. Enter the path on the TFTP server where the selected file is located. You may enter up to 32 characters. The factory default is blank. Enter the name of the file you want to download from the TFTP server. You may enter up to 32 characters. The factory default is blank. To initiate the download, check this box before clicking Submit. Document 34CSFP6XXUWS-SWUM100-D7 Using System Utilities Page 143