D-Link DWS-4026 Product Manual - Page 305

Software User Manual 12/10/09 D-Link Unified Access System CONFIGURED (STATIC) ROUTES Use the Configured Routes page to create and display static routes. To display the page, click LAN > L3 Features > Router > Configured Routes in the navigation tree. Figure 210: Configured Routes Field Network Address Subnet Mask Next Hop IP Next Hop Slot/Port Preference Table 191: Configured Routes Fields Description The IP route prefix for the destination. Also referred to as the subnet/network mask, this indicates the portion of the IP interface address that identifies the attached network. The next hop router address to use when forwarding traffic to the destination. The outgoing interface to use when forwarding traffic to the destination. For static reject routes it would be Null0. The preferences configured for the added routes. Adding a Static Route 1 Open the Configured Routes page. 2 Click Add Route. The Router Route Entry Create page displays: Figure 211: Create Default Route Entry 3 Next to Route Type, select Default route, Static or Static Reject from the menu. Default: Enter the default gateway address in the Next Hop IP Address field. Static: Enter values for Network Address, Subnet Mask, Next Hop IP Address, and Preference. Static Reject: Packets to these destinations will be dropped. If you select Static as the route type, the screen refreshes and additional fields appear, as Figure 213 shows. Document 34CSFP6XXUWS-SWUM100-D7 Router Page 305