D-Link DWS-4026 Product Manual - Page 476

D-Link Unified Access System Software User Manual 12/10/09 - Association Detail: Shows additional information about packets the associated client transmits and receives during association with a single managed AP. - Session Detail: Shows additional information about packets the associated client transmits and receives during a session, which can include statistics for one or more managed AP associations if the client has roamed. Since the associated client database supports roaming across APs, an entry is not removed when a client disassociates from a specific AP. After a client has disassociated, the entry is deleted after the client times out. You configure the timeout value in the Client Roam Timeout field on the WLAN > Administration > Advanced Configuration > Global page. The timeout value corresponds to the time allowed for a client to roam to another managed AP. Viewing Associated Client Summary Status Figure 321: Associated Client Status Table 297 describes the information available on the WLAN > Monitoring > Client > Associated Clients > Summary page for the associated client status. Field MAC Address AP MAC Address SSID BSSID Client IP Address NetBIOS Name Location Channel Radio Encryption Status Table 297: Associated Client Status Summary Description The Ethernet address of the client station. If the MAC address is followed by an asterisk (*), the client is associated with an AP managed by a peer switch. The Ethernet address of the AP. The network on which the client is connected. The Ethernet MAC address for the managed AP VAP where this client is associated. The IP address of the associated client, if available. The NetBIOS name of the wireless client. For Microsoft Windows hosts, the NetBIOS name is typically the same as, or based on the host name of the client. The configured descriptive location for the managed AP. The operating channel for the client association. The radio and mode. The type of encryption in use. Indicates whether or not the client has associated and/or authenticated. The valid values are: • Associated: The client is currently associated to the managed AP. • Authenticated: The client is currently associated and authenticated to the managed AP. • Disassociated: The client has disassociated from the managed AP. If the client does not roam to another managed AP within the client roam timeout, it will be deleted. Page 476 Monitoring Status and Statistics Document 34CSFP6XXUWS-SWUM100-D7