D-Link DXS-1100-10TS User Manual - Page 48
Management > SNMP > SNMP View Table Settings
View all D-Link DXS-1100-10TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4 Configuration D-Link 10 Gigabit Ethernet Switch User Manual Figure 4.47 - Management > SNMP > SNMP Linkchange Trap Settings The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here. Trap Sending: Enable or disable the sending of the SNMP notification traps that is generated by the system. Trap State: Enable or disable the SNMP link change trap. Click Apply to accept the changes made. Management > SNMP > SNMP View Table Settings This window is used to assign views to community strings that define which MIB objects can be accessed by a remote SNMP manager. The SNMP Group created with this table maps SNMP users (identified in the SNMP User Table) to the views created in the previous window. Figure 4.48 - Management > SNMP > SNMP View Table Settings The fields that can be configured are described below: View Name: Enter an alphanumeric string of up to 32 characters. This is used to identify the new SNMP view being created. 41