D-Link DXS-1100-10TS User Manual - Page 51
Management > SNMP > SNMP User Table Settings
View all D-Link DXS-1100-10TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
4 Configuration Click Apply to accept the changes made. Management > SNMP > SNMP User Table Settings D-Link 10 Gigabit Ethernet Switch User Manual Figure 4.52 - Management > SNMP > SNMP User Table Settings The fields that can be configured are described below: User Name: Enter an alphanumeric string of up to 32 characters. This is used to identify the SNMP users. Group Name: Enter the SNMP group name to which the user belongs. The syntax is general string that does not allow spaces. SNMP Version: Select the SNMP version. Options to choose from are v1, v2c, and v3. SNMP V3 Encryption: When selecting v3 in the SNMP Version drop-down list, this option is available. Options to choose from are None, Password, and Key. Auth-Protocol: When selecting v3 in the SNMP Version drop-down list, and selecting either Password or Key in the SNMP V3 Encryption drop-down list, this option is available. Select the authentication level. Options to choose from are MD5, and SHA. MD5 - Select to use the HMAC-MD5-96 authentication level. This field will require the user to enter a password or a key. SHA - Specify that the HMAC-SHA authentication protocol will be used. This field will require the user to enter a password or a key. Priv-Protocol: When selecting v3 in the SNMP Version drop-down list, and selecting either Password or Key in the SNMP V3 Encryption drop-down list, this option is available. Select the private protocol. Options to choose from are None, and DES56. None - Specify that no authorization protocol is in use. DES56 - Specify that DES 56-bit encryption is in use, based on the CBC-DES (DES-56) standard. This field will require the user to enter a password or a key. Click Add to add a new entry based on the information entered. Click Delete to remove the specified entry. Management > SNMP > SNMP Host Table Settings This window is used to configure and display the recipient of the SNMP notification. 44