D-Link DXS-1100-10TS User Manual - Page 60
L2 Features > FDB > MAC Address Table
View all D-Link DXS-1100-10TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
4 Configuration D-Link 10 Gigabit Ethernet Switch User Manual Figure 4.71 - L2 Features > FDB > MAC Address Table Settings (MAC Address Learning) The fields that can be configured are described below: From Port / To Port: Select the range of ports that will be used for this configuration here. State: Enable or disable the MAC address learning function on the ports specified here. Click Apply to accept the changes made. L2 Features > FDB > MAC Address Table This window is used to view the entries listed in the MAC address table. Figure 4.72 - L2 Features > FDB > MAC Address Table The fields that can be configured are described below: Port: Select the port that will be used for this configuration here. VID: Enter the VLAN ID that will be used for this configuration here. MAC Address: Enter the MAC address that will be used for this configuration here. Click Clear Dynamic by Port to clear the dynamic MAC address listed on the corresponding port. Click Clear Dynamic by VLAN to clear the dynamic MAC address listed on the corresponding VLAN. Click Clear Dynamic by MAC to clear the dynamic MAC address entered. 53