D-Link DXS-1100-10TS User Manual - Page 56
Management > Session Timeout, Management > File System, Management > Web
![]() |
View all D-Link DXS-1100-10TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4 Configuration D-Link 10 Gigabit Ethernet Switch User Manual Figure 4.62 - Management > Web The fields that can be configured are described below: Port: Enter the TCP port number used for Web-based management of the Switch. The "well-known" TCP port for the Web-based protocol is 80. Click Apply to accept the changes made. Management > Session Timeout This window is used to configure the session timeout. Figure 4.63 - Management > Session Timeout The fields that can be configured are described below: Web Session Timeout: Enter the time in seconds of the web session timeout. Tick Default to return to the default setting. The value is from 60 to 36000 seconds. The default value is 180 seconds. Click Apply to accept the changes made. Management > File System The File System is used to provide the user with flexible file operation on the Flash. All the firmware, configuration information and system log information are stored in the Flash as files. Figure 4.64 - Management > File System The fields that can be configured are described below: Path: Enter the path string Click Go to navigate to the path entered. Click the C: hyperlink to navigate the C: drive. After clicking the C: hyperlink, the following window will appear: 49
![](/manual_guide/products/dlink-dxs110010ts-user-manual-8395472/56.png)