D-Link DXS-1100-10TS User Manual - Page 93
L3 Features > IPv6 Neighbor, to restart DHCPv6 client on an interface.
View all D-Link DXS-1100-10TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
4 Configuration D-Link 10 Gigabit Ethernet Switch User Manual Click Apply to accept the changes made for each individual section. After clicking the Interface IPv6 Address tab, the following page will appear. Figure 4.121 - L3 Features > IPV6 Interface (Interface IPv6 Address) Click Delete to delete the specified entry. After clicking the DHCPv6 Client tab, at the top of the page, the following page will be available. Figure 4.122 - L3 Features > IPV6 Interface (DCHPv6 Client) The fields that can be configured are described below: Client State: Select this option to enable or disable the DHCPv6 client state. Tick the Rapid Commit check box to proceed with two-message exchange for prefix delegation. Click Apply to accept the changes made. Click Restart to restart DHCPv6 client on an interface. L3 Features > IPv6 Neighbor This window is used to configure and view the IPv6 neighbor settings. Figure 4.123 - L3 Features > IPV6 Neighbor The fields that can be configured are described below: IPv6 Address: Enter the IPv6 address. MAC Address: Enter the MAC address. Click Apply to accept the changes made. Click Find to locate a specific entry based on the information entered. Click Clear to clear all the information for the specified IPv6 address. 86