D-Link DXS-1100-10TS User Manual - Page 94
L3 Features > IPv6 Route Table, QoS > Basic Settings > Port Default CoS
View all D-Link DXS-1100-10TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
4 Configuration D-Link 10 Gigabit Ethernet Switch User Manual Click Clear All to clear all the information in this table. Click Delete to remove the specific entry. Enter a page number and click Go to navigate to a specific page when multiple pages exist. L3 Features > IPv6 Route Table This window is used to view and configure the IPv6 route table. Figure 4.124 - L3 Features > IPV6 Route Table Enter a page number and click Go to navigate to a specific page when multiple pages exist. QoS > Basic Settings > Port Default CoS This window is used to view and configure the port's default CoS settings. Figure 4.125 - QoS > Basic Settings > Port Default CoS The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here. Default CoS: Select the default CoS option for the port(s) specified here. Options to choose from are 0 to 7. Select the Override option to apply the port's default CoS to all packets (tagged or untagged) received by the port. Select the None option to use the default settings. Click Apply to accept the changes made. QoS > Basic Settings > Port Scheduler Method This window is used to view and configure the port scheduler method settings. 87