D-Link DXS-1100-10TS User Manual - Page 86
L2 Features > LLDP > LLDP Dot3 TLVs Settings, Enable or disable the Protocol Identity TLV to send
View all D-Link DXS-1100-10TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
4 Configuration D-Link 10 Gigabit Ethernet Switch User Manual Figure 4.110 - L2 Features > LLDP > LLDP Dot1 TLVs Settings The fields that can be configured are described below: From Port / To Port: Select the appropriate port range used for the configuration here. Port VLAN: Enable or disable the port VLAN ID TLV to send. The Port VLAN ID TLV is an optional fixed length TLV that allows a VLAN bridge port to advertise the port's VLAN identifier (PVID) that will be associated with untagged or priority tagged frames. VLAN Name: Enable or disable the VLAN name TLV to send, and enter the ID of the VLAN in the VLAN name TLV. Protocol Identity: Enable or disable the Protocol Identity TLV to send, and the protocol name. Options for protocol name to choose from are None, LACP, STP, and All. Click Apply to accept the changes made. L2 Features > LLDP > LLDP Dot3 TLVs Settings This window is used to configure an individual port or group of ports to exclude one or more IEEE 802.3 organizational specific TLV data type from outbound LLDP advertisements. 79