D-Link DXS-3250E Installation Guide - Page 11

Device Description Viewing the Device Viewing the Device The devices described in this section are stackable Gigabit Ethernet Managed Switches. Device management is performed using an Embedded Web Server (EWS) or through a Command Line Interface (CLI). The device configuration is performed via an RS-232 interface. This section contains descriptions for the following: • DXS-3250 Front Panel • DXS-3227 Front Panel • Back Panels DXS-3250 Front Panel The D-Link DXS-3250 is a 48 port Gigabit Ethernet Managed Switch. The device contains 48 gigabit network ports and 4 SFP Ports on the front panel for network connectivity, and 2 stacking ports on the back panel. The following figure illustrates the DXS-3250 front panel. Figure 1: DXS-3250 Front Panel The device front panel is configured as follows: • 48 Giga Ethernet ports - RJ-45 ports designated as 10/100/1000Base-T . The RJ-45 ports are designated as ports Ports 1-48. • RS-232 Console port - An asynchronous serial console port supporting the RS-232 electrical specification. The port is used to connect the device to the console managing the device. • 4 SFP Ports - There are four SFP port, which contains 1000Base-X (fiber) connections. On the front panel there are the Port activity LEDs on each port with the system LEDs displayed separately. DXS-3227 Front Panel The D-Link DXS-3227 is a 24 port Gigabit Ethernet Managed Switch. The device contains 24 gigabit network ports and 4 SFP Ports on the front panel for network connectivity, and 2 stacking ports on the back panel. The device also contains Power-over-Ethernet. The following figure illustrates the DXS-3227 front panel. Figure 2: DXS-3227 Front Panel Page 10