D-Link DXS-3250E Installation Guide - Page 119

D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide Configuring LACP LAG ports can contain different media types if the ports are operating at the same speed. Aggregated links can be set up manually or automatically established by enabling LACP on the relevant links. Aggregate ports can be linked into link-aggregation port-groups. Each group is comprised of ports with the same speed. The LACP Parameters Page contains fields for configuring LACP LAGs. To configure LACP for LAGs: 1. Click Advanced Setup > Interface > LACP Parameters tab. The LACP Parameters Page opens: Figure 67: LACP Parameters Page The LACP Parameters Page contains the following fields: • LACP System Priority - Specifies system priority value. The field range is 1-65535. The field default is 1. • Port - Displays the port number to which timeout and priority values are assigned. • Port-Priority - Displays the LACP priority value for the port. The field range is 1-65535. • LACP Timeout - Displays the administrative LACP timeout. 2. Click . The LACP Parameters Settings Page opens: Page 119