D-Link DXS-3250E Installation Guide - Page 41

D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide 7. Enter the command "reload". The following message is displayed: Console# reload This command will reset the whole system and disconnect your current session.Do you want to continue (y/n)[n]? 8. Enter "Y" to reboot the switch. Boot Image Download Loading a new boot image from the TFTP server and programming it into the flash updates the boot image. The boot image is loaded when the switch is powered on. To download a boot file through the TFTP server: 1. Ensure that an IP address is configured on one of the device ports and pings can be sent to a TFTP server. 2. Ensure that the file to be downloaded (the .rfb file) is saved on the TFTP server. 3. Enter the command "show version" to verify which boot version is currently running on the device. The follow- ing is an example of the information that appears: Console# show version SW version x.xx.xx (date xx-xxx-2004 time 13:42:41)Boot version x.xx.xx (date xx-xx-2004 time 15:12:20)HW version xx.xx.xx (date xxxxx-2004 time 12:12:20) 4. Enter the command "copy tftp://{tftp address}/{file name} boot" to copy the boot image to the switch. The following is an example of the information that appears: Console# copy tftp://176.215.31.3/6024_boot-10013.rfb Erasing file ...done Copy:393232 bytes copied in 00:00:05 [hh:mm:ss] 5. Enter the command "reload". The following message is displayed: Console# reload This command will reset the whole system and disconnect your current session. Do you want to continue (y/n)[n]? 6. Enter "Y" to reboot the switch. Startup Menu Functions Additional configuration functions can be performed from the Startup menu. To display the Startup menu: 1. During the boot process, after the first part of the POST is completed press or within two sec- onds after the following message is displayed: Autoboot in 2 seconds -press RETURN or Esc.to abort and enter prom. Page 41