D-Link DXS-3250E Installation Guide - Page 39
Software Download and Reboot, Configuring an Initial HTTP Password, Software Download through XModem
UPC - 790069308420
View all D-Link DXS-3250E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide When changing a device mode to enable, enter "jones". Configuring an Initial HTTP Password To configure an initial HTTP password, enter the following commands: Console(config)# ip http authentication local Console(config)# username admin password user1 level 15 Configuring an initial HTTPS Password To configure an initial HTTPS password, enter the following commands: Console(config)# ip https authentication local Console(config)# username admin password user1 level 15 Enter the following commands once when configuring to use a console, a Telnet, or an SSH session in order to use an HTTPS session. In the Web browser enable SSL 2.0 or greater for the content of the page to appear. Console(config)# crypto certificate generate key_generate Console(config)# ip https server When initially enabling an http or https session, enter admin for user name and user1 for password. Note HTTP and HTTPS services require level 15 access and connect directly to the configuration level access. Software Download and Reboot Software Download through XModem This section contains instructions for downloading device software (system and boot images) using XModem, which is a data transfer protocol for updating back-up configuration files. To download a boot file using XModem: 1. Enter the command "xmodem:boot". The switch is ready to receive the file via the XModem protocol and dis- plays text similar to the following: Console# copy xmodem:boot Please download program using XMODEM. console# 2. Specify the path of the source file within 20 seconds. If the path is not specified within 20 seconds, the command times out. To download a software image file using XModem: 1. Enter the command "xmodem:image". The switch is ready to receive the file via the XModem protocol. 2. Specify the path of the source file to begin the transfer process. The following is an example of the informa- tion that appears: Console# copy xmodem:image Please download program using XMODEM console# Page 39