Dell B5465dnf Mono Laser Printer MFP User's Guide - Page 176

Understanding the printer menus 176 Use Delete Log Yes No Configure Log Enable Audit Yes No Enable Remote Syslog No Yes Remote Syslog Facility 0-23 Severity of events to log 0-7 Set Date/Time menu Use Current Date and Time Manually Set Date and Time Time Zone Automatically Observe DST On Off Custom Time Zone Setup DST Start Week DST Start Day DST Start Month DST Start Time DST End Week DST End Day DST End Month DST End Time DST Offset Enable NTP On Off NTP Server To Specify whether or not audit logs are deleted. Note: Yes is the factory default setting. Specify how and whether or not audit logs are created. Notes: • Enable Audit determines if events are recorded in the secure audit log and remote syslog. No is the factory default setting. • Enable Remote Syslog determines if logs are sent to a remote server. No is the factory default setting. • Remote Syslog Facility determines the value used to send logs to the remote syslog server. 4 is the factory default setting. • If the security audit log is activated, then the severity value of each event is recorded. 4 is the factory default setting. To View the current date and time settings for the printer. Enter the date and time. Note: Date/Time is set in YYYY-MM-DD HH:MM:SS format. Select the time zone. Note: GMT is the factory default setting. Set the printer to use the applicable daylight saving time (DST) start and end times associated with the printer Time Zone setting. Note: On is the factory default setting and uses the applicable Daylight Saving Time associated with the Time Zone setting. Enable the user to set up the time zone. Enable Network Time Protocol, which synchronizes the clocks of devices on a network. Note: On is the factory default setting. View the NTP server address.