Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 1057
switchStatusShow, Switch State: HEALTHY, MARGINAL, or DOWN
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1057 highlights
switchStatusShow 2 switchStatusShow Displays overall switch status. SYNOPSIS switchstatusshow DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to display the overall status for a switch. In addition, users with a Fabric Watch license are able to view a listing of unhealthy ports that includes the port index number, the port name, and the port status. This command displays the following information: the overall switch status, and the status of the following contributors: • Report Time • Switch Name • IP address • Switch State: HEALTHY, MARGINAL, or DOWN • Duration: hours and minutes (HH:MM) the switch has been in the current state • Power supplies • Temperatures • Fans • WWN servers (dual-CP systems only) • Standby CP (dual-CP systems only with HA enabled) • Blades (bladed systems only) • Flash • Marginal ports • Faulty ports • Error Ports Status values are HEALTHY, MARGINAL, or DOWN, depending on whether thresholds established by switchStatusPolicySet have been exceeded. The overall status is based on the most severe status of all contributors. Refer to switchStatusPolicySet for details on the calculation of contributors and overall switch status. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To display a switch health report on a Brocade 6510 with one faulty port: switch:user> switchstatusshow Switch Health Report Report time: 03/12/2011 08:48:00 PM Switch Name: ras220 IP address: 10.20.10.220 SwitchState: MARGINAL Duration: 47:42 Power supplies monitor Temperatures monitor Fans monitor Flash monitor HEALTHY HEALTHY HEALTHY MARGINAL Fabric OS Command Reference 53-1002746-01 1029