Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 561
lsAge, reserved, options, advertiser, incarn, length, chksum, linkCnt, flags, LinkId, out port
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 561 highlights
lsDbShow 2 NOTES OPERANDS lsAge reserved type options lsId advertiser incarn length chksum linkCnt flags LinkId out port rem port cost costCnt type Age, in seconds, of this LSR. An LSR is removed from the database when its age exceeds 3,600 seconds. Reserved for future use. Type of the LSR. Always 1. Always 0. ID of this LSR. It is identical to the domain ID. Domain ID of the switch that originated this LSR. Incarnation number of this LSR. Total length, in bytes, of this LSR. Includes header and link state information for all links. Checksum of total LSR, with exception of lsAge field. Number of links in this LSR. Each link represents a neighbor in NB_ST_FULL state. Always 0. ID of this link. It is the domain ID of the switch on the other side of the link. Port number on the local switch. Port number of the port on the other side of the link. Cost of this link. The default cost for a 1 Gbps link is 1,000. Always 0. Always 1. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operand: domain Specifies the domain ID of the LSR to be displayed. This operand is optional; if omitted, the entire link state database is displayed. Fabric OS Command Reference 533 53-1002746-01