Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 740
vlantag, portCfg vlantag, fciptunnel, ipsec, mgmtif, mgmtroute, portcfgshow 10/38
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 740 highlights
2 portCfgShow EXAMPLES vlantag fciptunnel all ve_port -ipsec mgmtif ge_port mgmtroute ge_port Displays the VLAN tagging configuration. For each entry, the output displays the IP interface address, the destination IP address, the VLAN ID, and the L2 CoS priority. This display includes permanent entries only. Permanent entries are configured at the IP interface level with the portCfg vlantag command. To view VLAN tagged tunnels and circuits along with permanent entries, use the portShow vlantag command. Displays FCIP tunnels and related parameters. Valid arguments for fciptunnel include the following: Displays information for all FCIP tunnels. Displays information for the specified FCIP tunnel. To display the tunnel, specify the VE_Port number associated with the tunnel configured on one of the GbE ports. VE_Ports are numbered 16-23. Displays whether IPSec is enabled or disabled. If enabled, the key is displayed. If IPSec is enabled and configured in legacy mode, the mode is displayed as "legacy". The mode information is displayed whether or not you issue the -ipsec option. This operand is optional. Displays the inband management interfaces configured for a specified GbE Port. The display includes the interface status (enabled or disabled), the interface IPv4 Address, the netmask, effective MTU, and annotated port flags. Displays the management routes configured for a specified GbE Port. The display includes the destination IPv4 Address, the netmask, the gateway address, and annotated port flags. The metric field is not valid for the Brocade 7800. To display the port configuration settings for a single port on a Brocade DCX 8510-8: switch:admin> portcfgshow 10/38 Area Number: 222 Octet Speed Combo: 1(16G|8G|4G|2G) Speed Level: AUTO(HW) AL_PA Offset 13: OFF Trunk Port ON Long Distance LS VC Link Init OFF Desired Distance 10 Km Reserved Buffers 86 Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF Locked E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF LOS TOV enable OFF NPIV capability ON QOS E_Port AE Port Auto Disable: ON LOSG OLS NOS LIP Rate Limit OFF EX Port OFF Mirror Port OFF 712 Fabric OS Command Reference 53-1002746-01