Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 632
perfMonitorShow
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 632 highlights
2 perfMonitorShow perfMonitorShow Displays end-to-end and interswitch link performance monitors on a port. SYNOPSIS perfmonitorshow --class monitor_class [slot/]port [interval] DESCRIPTION NOTES OPERANDS Use this command to display End-to-End (EE) performance monitors on a port. If interval is specified, the command displays a snapshot of the traffic at the specified interval. If no interval is specified, this command displays the following information: Key The monitor number. SID The source Port ID. DID The destination Port ID. Owner_app The owner application: TELNET, WEB_TOOLS, or API. Tx_count The number of FC words transmitted. Rx_count The number of FC words received. Owner_ip_addr The IP address of the originator that created the EE monitor. Displays the IPv6 address if applications pass the IP address while adding the monitor. If the monitor is added using performance monitor commands, this field displays N/A. ISL Monitors are deprecated as of Fabric OS v7.0.0. Management of filter-based monitors is no longer supported with this command; it is now provided through the Frame Monitor management interface (fmMonitor). This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: --class monitor_class Specifies the monitor class as one of the following: EE (end-to-end) or ISL (interswitch link). These values are case-sensitive. slot For bladed systems only, specifies the slot number of the port on which to display the monitor, followed by a slash (/). port Specifies the number of the port on which to display the monitor, relative to its slot for bladed systems. Use switchShow for a listing of valid ports. 604 Fabric OS Command Reference 53-1002746-01