Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 324
fcoe, fcoe --fcmapset -vlan
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 324 highlights
2 fcoe fcoe Manages and displays FCoE configuration. SYNOPSIS fcoe --cfgshow [[slot/]port] fcoe --portcfg [[slot/]port] ve_port | vf_port fcoe --disable [slot/]port fcoe --enable [slot/]port fcoe --loginshow [[slot/]port] fcoe --fcmapset -vlan vid fcmapid fcoe --fcmapunset -vlan vid fcoe --fipcfg -advintvl intvl fcoe --fipcfgshow fcoe --resetlogin [-teport [slot/]port | -device wwn] fcoe --help DESCRIPTION NOTES OPERANDS Use this command to configure and display the status of FCoE ports, FCoE Initialization Protocol (FIP), and FCMAP settings. Unlike regular FC ports, FCoE ports are embedded interfaces that are not directly associated with an external physical port on the switch. Although show commands such as switchShow display FCoE ports as "ports," configuration of these ports through the regular FC CLI is disabled. Only the FCoE CLI commands can be used. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands. slot Specifies the slot number on bladed systems, followed by a slash (/). port Specifies the port number. There are 24 configurable embedded FCoE ports on the Brocade 8000 switch, and the valid range for port is 8 to 31. On the Brocade FCoE 10-24 blade, there are 24 configurable FCoE ports numbered 0 to 23. Use switchShow for a list of valid FCoE ports. --help Displays the command usage. --cfgshow Displays the configuration of a specified embedded FCoE port. If a port is not specified, the command displays all port configurations. --disable Disables the specified FCoE port. 296 Fabric OS Command Reference 53-1002746-01