Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 745
portSwapDisable, portSwapShow
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 745 highlights
portCfgShow 2 SEE ALSO switch:admin> portcfgshow fciptunnel 1/12 Tunnel ID: 1/12 Tunnel Description: Compression: Off Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Enabled (legacy) QoS Percentages: High 50%, Med 30%, Low 20% Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:52:fe:00 Flags: 0x00000000 FICON: Off To display the inband management interface for a single GbE Port on a Brocade 7800: switch:admin> portcfgshow mgmtif ge0 Inband Management: ge0 Enabled Interface IPv4 Address NetMask Effective MTU Flags 0 20.20.0.151 255.255.255.0 1500 Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp To display the management route for a configured inband management interface on a Brocade 7800: switch:admin> portcfgshow mgmtroute ge0 Port: ge0 IP Address Mask Gateway Metric Flags 192.168.1.0 255.255.255.0 20.20.1.250 0 Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static L=LinkLayer(Arp) portCfg, portCfgAutoDisable, portCfgCreditRecovery, portCfgEport, portCfgFec, portCfgGport, portCfgLongDistance, portCfgLport, portCfgNPIVPort, portCfgOctetSpeedCombo, portCfgSpeed, portCfgTrunkPort, portSwapDisable, portSwapShow, switchShow Fabric OS Command Reference 717 53-1002746-01