Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 819
portshow -x, General port status display commands supported on all platforms
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 819 highlights
portShow 2 FUNCTION SYNOPSIS General port status display commands supported on all platforms portshow [slot/][ge]port portshow -i [index1[-index2] [...]] [-f] portshow -x [hex1[-hex2] [...]] DESCRIPTION Use this command to display general port status and configuration parameters for the specified port. This command is valid on all platforms, but the output is platform-specific and not all fields are displayed on all platforms. The following general information is displayed when the command is issued for a non-GbE port without additional arguments: portIndex Index number assigned to the port. portName Name assigned to the port by the portName command. On standalone platforms, the default port name is the port number, for example, "port5". On enterprise-class platforms, the default port name is a combination of the slot number and the port number, for example, "slot1port5". portHealth Current health of the port (requires a Fabric Watch license). Authentication Authentication type and associated parameters (if applicable) used on the port at port online. None No authentication was performed. FCAP FCAP authentication was performed. DHCHAP DHCHAP authentication was performed. Also displays DH group and hash type used for authentication. portDisableReason Provides an explanation for the port's disabled status, if it has not been disabled by portDisable or portCfgPersistentDisable. portCFlags Port control flags. portFlags A bit map of port status flags, including information on the type of port, whether it is fully online, and whether logins have been accepted. The port flags display ENCRYPT if the port has been enabled for encryption. The port flags display COMPRESS if the port has been enabled for compression. The port flags display D_PORT if the port has been enabled as a diagnostic port. portType The port's type and revision numbers. POD Port Port on Demand License status. portState The port's SNMP state: Fabric OS Command Reference 791 53-1002746-01