Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 92
authinit
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
2 authUtil EXAMPLES --authinit [slot/]port [, [slot/]port...| allE Reinitiates authentication on selected ports after changing the DH-CHAP group, hash type, and shared secret between a pair of switches. This command does not work on Private, Loop, NPIV and FICON devices. This command may bring down the E_Ports if the DH-CHAP shared secrets are not installed correctly. This command is not supported on encrypted ports. This option is not supported in AG mode. Valid options include the following: slot Specify the slot number, if applicable, followed by a slash (/). port Specify the port number. On enterprise-class platforms, use the slot/port format for specifying the port number. allE Specify all E_Ports in the switch. To display authentication configuration on the switch: switch:admin> authutil --show AUTH TYPE HASH TYPE GROUP TYPE fcap,dhchap sha1,md5 0,1,2,3,4 Switch Authentication Policy: PASSIVE Device Authentication Policy: OFF To set DH-CHAP as the authentication protocol: switch:admin> authutil --set -a dhchap Authentication is set to dhchap. To set both protocols in order of FCAP and then DH-CHAP: switch:admin> authutil --set -a all Authentication is set to fcap,dhchap. To set DH group 3: switch:admin> authutil --set -g 3 DH Group was set to 3. To set all DH groups to be specified in the authentication negotiation in the order of 0, 1, 2, 3, and 4: switch:admin> authutil --set -g "*" DH Group is set to 0,1,2,3,4 To set the Switch policy to active mode: switch:admin> authutil --policy -sw active Warning: Activating the authentication policy requires either DH-CHAP secrets or PKI certificates depending on the protocol selected. Otherwise, ISLs will be segmented during next E-port bring-up. ARE YOU SURE (yes, y, no, n): [no] y Auth Policy is set to ACTIVE 64 Fabric OS Command Reference 53-1002746-01