Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 414

2 firmwareKeyShow firmwareKeyShow Displays the public key used for signed firmware validation. SYNOPSIS firmwarekeyshow DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO This command displays the contents of the public key used for validating the integrity of firmware images when signed firmware validation is enabled. A firmware key should be installed on every switch as a part of the Fabric OS installation. The presence of a firmware key does not imply that the firmware signature is checked during firmwareDownload. Signed Firmware Download must be enabled before the public key can be used for signature validation. Use the configure command to enable Signed Firmware Download. If Signed Firmware Download is enabled, and if the validation succeeds, firmware download proceeds normally. If the firmware is not signed or if the signature validation fails, signed firmware download fails. Refer to the Fabric OS Administrator's Guide for complete details on upgrading or downgrading firmware. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To display the public key used for signed firmware validation: switch:admin> firmwarekeyshow -----BEGIN PUBLIC KEY----MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDjuQpMk4FrceFvVZ12iAakFNv9 k4ZGhFDMPGIHIems1Ywqdl55U7LTDIVwoViTLevtIDn012r1XlNQ+DORAzvJfkwD XegkeTn/8wDgHBwotPz4WTd9UGJ9M0Vs52ro1TiukIpsh084LXKgxt+IgdseRCzY 8p8rQZWLpyputx6rgwIDAQAB -----END PUBLIC KEY----- firmwareDownload, configureChassis 386 Fabric OS Command Reference 53-1002746-01