Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 230
show -container -all -cfg, show -tapepool, Key ID state: Rekey
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
2 cryptoCfg Use the --show -container -all -cfg command for configuration information on all CryptoTarget containers in the encryption group, or specify a crypto_target_container_name for information on a specified CTC. The display includes the following information: • Encryption group name: user-defined label • Number of containers: numeric value • For each container - Container name: a user-defined label - Type: tape or disk - EE node: the node WWN - EE slot: numeric value - Target: target port WWN, node WWN - VT: virtual target port WWN, node WWN - Number of hosts: numeric value - Configuration status: committed or defined - For each host: the host port WWN and the node WWN - For each VI: the virtual initiator port WWN and the node WWN - Number of LUNs: numeric value If a rekey session is in progress while the command is run, the following additional information is displayed: • LUN number: numeric ID • LUN type: disk, tape drive, tape medium changer, tape attached medium changer, offline/unknown, or unsupported/other • LUN serial number (disk only): alpha-numeric ID • Encryption mode: encrypt or cleartext • Encryption format: native or DF compatible • Encrypt existing data: enabled or disabled • Rekey: enabled or disabled • LUN state: refer to the appendix in the Fabric OS Encryption Administrator's Guide • Encryption algorithm: AES256 -XTS (disk), AES256-CCM (tape), or none • Key ID state: Rekey • Key ID: numeric identifier • Key creation time: date and time of key creation • Key life (in days); number of days until expiration • Rekey status: numeric value • Key expiration time • Rekey session number: numeric value • Percentage complete • Rekey state: Read or write Phase • Rekey role: primary, alternate • Block size: numeric value • Number of blocks: numeric value • Current logical block address (LBA) being processed Use the --show -tapepool command to display tape pool configuration parameters for all Tape pools or for a specific tape pool. For each tape pool, the display includes the following information: • tape pool Label: user-define label • Key Life: Life span in days 202 Fabric OS Command Reference 53-1002746-01