Dell Brocade 300 Fabric OS Command Reference v7.1.0 - Page 652
portBufferCalc, portCfgLongDistance
View all Dell Brocade 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 652 highlights
2 portBufferCalc portBufferCalc Calculates the number of buffers required per port. SYNOPSIS portbuffercalc [slot/]port [-distance distance] [-speed speed] [-framesize framesize] portBufferCalc --help DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to calculate how many buffers are required for a given distance, speed, and framesize. You can use the same number of buffers and port speed, when configuring the portCfgLongDistance command. If no options are specified, then the current port's configuration is considered to calculate the number of buffers required. Buffers required for the given frame size, distance and speed is calculated using the below formula: • 1 buffer is required for 1 km at 2G (2048 framesize). • 8 buffers are required for 1 km at 16G (2048 framesize). This command supports the following operands: -distance distance Specifies the desired distance with valid range of 10Km to 1500Km. -speed speed Specifies the port speed. The valid values are: 1 Specifies port speed as 1Gbps. 2 Specifies port speed as 2Gbps. 4 Specifies port speed as 4Gbps. 8 Specifies port speed as 8Gbps. 10 Specifies port speed as 10Gbps. 16 Specifies port speed as 16Gbps. -framesize framesize Specifies the desired framesize in bytes with a maximum value 2048. --help Displays command usage. To calculate the buffers required per port: switch:admin> portbuffercalc 9/4 \ -distance 100 -speed 8 -framesize 512 1606 buffers required for 100km at 8G and framesize of 512 bytes portCfgLongDistance 624 Fabric OS Command Reference 53-1002746-01