Dell Brocade 815 Brocade Adapters Installation and Reference Manual - Page 217
ATTENTION, TABLE 26, Supported Fibre Channel features, continued
View all Dell Brocade 815 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
Host Bus Adapters 5 TABLE 26 Feature Supported Fibre Channel features (continued) Description Cable connector (stand-up adapters) ASIC External serial FLASH memory Data Rate Per Port - Full Duplex Performance Per Port Distance Support (stand-up adapters) Topology Protocols Other Features LC • Provides the Fibre Channel functionality for all HBA models. • Two on-board processors, each operating at 400 MHz, generate signal timing and link protocol in compliance with Fibre Channel standards. • Stores firmware and HBA BIOS code • 4 MB capacity • 1600 MB at 8 Gbps • 800 MB at 4 Gbps • 400 MB at 2 Gbps 500,000 IOPs (maximum) 50 m at 8 Gbps with 62.5/125 micron multimode fiber Point-to-Point (N_Port) • SCSI over FC (FCP) • FCP3 - initiator mode only • FC-SP Authentication • NPIV • ASIC Flip-flops Parity Protected • ECC Memory Parity Protected • Quality of Service (QoS) • Target Rate Limiting • Boot Over SAN • Fabric-Based Boot LUN Discovery • I/O Interrupt Coalescing • T10 Data CRC • Multiple Priority (VC_RDY) • Frame-Level Load Balancing • Persistent Binding • Fabric-Based Configuration ATTENTION For stand-up HBAs, use only Brocade-branded SFP laser transceivers supplied with this product. Brocade Adapters Installation and Reference Manual 189 53-1002144-01