Dell Inspiron 16 7610 Service Manual for computers with two fans - Page 16
Memory module, Removing the memory
View all Dell Inspiron 16 7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Steps 1. Place and snap the base cover into place on the palm-rest and keyboard assembly. 2. Tighten the two captive screws (M2x8.5) that secure the base cover to the palm-rest and keyboard assembly. 3. Replace the seven screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. Next steps 1. Exit Service Mode. 2. Follow the procedure in After working inside your computer. Memory module Removing the memory Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. About this task The following image(s) indicate the location of the memory and provides a visual representation of the removal procedure. 16 Removing and installing components
Steps
1.
Place and snap the base cover into place on the palm-rest and keyboard assembly.
2.
Tighten the two captive screws (M2x8.5) that secure the base cover to the palm-rest and keyboard assembly.
3.
Replace the seven screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly.
Next steps
1.
Exit
Service Mode
.
2.
Follow the procedure in
After working inside your computer
.
Memory module
Removing the memory
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Enter
Service Mode
.
3.
Remove the
base cover
.
About this task
The following image(s) indicate the location of the memory and provides a visual representation of the removal procedure.
16
Removing and installing components