Dell Inspiron 16 7610 Service Manual for computers with two fans - Page 26

Table 2. Antenna-cable color scheme, Steps, Connectors on the, wireless card, Antenna-cable color

Get Dell Inspiron 16 7610 PDF manuals and user guides View all Dell Inspiron 16 7610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Steps 1. Connect the antenna cables to the wireless card. Table 2. Antenna-cable color scheme Connectors on the wireless card Antenna-cable color Main White Auxiliary Black Silkscreen marking MAIN AUX △ (white triangle) ▲ (black triangle) 2. Place the wireless-card bracket on the wireless card. 3. Align the notch on the wireless card with the tab on the M.2 card slot on the system board. 4. Slide the wireless card into the M.2 card slot on the system board. 5. Replace the screw (M2x3) that secures the wireless card and wireless-card bracket to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. 26 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Steps
1.
Connect the antenna cables to the wireless card.
Table 2. Antenna-cable color scheme
Connectors on the
wireless card
Antenna-cable color
Silkscreen marking
Main
White
MAIN
△
(white triangle)
Auxiliary
Black
AUX
▲
(black triangle)
2.
Place the wireless-card bracket on the wireless card.
3.
Align the notch on the wireless card with the tab on the M.2 card slot on the system board.
4.
Slide the wireless card into the M.2 card slot on the system board.
5.
Replace the screw (M2x3) that secures the wireless card and wireless-card bracket to the system board.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
26
Removing and installing components