Dell Inspiron 16 7610 Service Manual for computers with two fans - Page 32
Steps, To avoid damaging the display
View all Dell Inspiron 16 7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Steps 1. Using the pull tab, disconnect the display-cable from the connector on the system board. 2. Remove the three screws (M2.5x5) that secure the right-display hinge to the system board. 3. Pry open the right-display hinge at an angle of 90 degrees. 4. Remove the three screws (M2.5x5) that secure the left-display hinge to the I/O board. 5. Pry open the left-display hinge at an angle of 90 degrees. 6. Gently lift the palm-rest and keyboard assembly off the display assembly CAUTION: To avoid damaging the display, do not slide the palm-rest and keyboard assembly over the display assembly. 32 Removing and installing components
Steps
1.
Using the pull tab, disconnect the display-cable from the connector on the system board.
2.
Remove the three screws (M2.5x5) that secure the right-display hinge to the system board.
3.
Pry open the right-display hinge at an angle of 90 degrees.
4.
Remove the three screws (M2.5x5) that secure the left-display hinge to the I/O board.
5.
Pry open the left-display hinge at an angle of 90 degrees.
6.
Gently lift the palm-rest and keyboard assembly off the display assembly
CAUTION:
To avoid damaging the display, do not slide the palm-rest and keyboard assembly over the display
assembly.
32
Removing and installing components