Dell Inspiron 16 7610 Service Manual for computers with two fans - Page 24

Wireless card, Removing the wireless card

Get Dell Inspiron 16 7610 PDF manuals and user guides View all Dell Inspiron 16 7610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Steps 1. Align the notch on the M.2 2230 solid-state drive with the tab on the M.2 card slot on the system board. 2. Slide the M.2 2230 solid-state drive into the M.2 card slot on the system board. 3. Slide the tab on the M.2 2230 thermal shield into the M.2 card slot and align the screw hole on the thermal shield to the screw hole on the system board. 4. Replace the screw (M2x3) that secures the M.2 2230 thermal shield to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Wireless card Removing the wireless card Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. About this task The following image(s) indicate the location of the wireless card and provides a visual representation of the removal procedure. 24 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Steps
1.
Align the notch on the M.2 2230 solid-state drive with the tab on the M.2 card slot on the system board.
2.
Slide the M.2 2230 solid-state drive into the M.2 card slot on the system board.
3.
Slide the tab on the M.2 2230 thermal shield into the M.2 card slot and align the screw hole on the thermal shield to the
screw hole on the system board.
4.
Replace the screw (M2x3) that secures the M.2 2230 thermal shield to the system board.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
Wireless card
Removing the wireless card
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Enter
Service Mode
.
3.
Remove the
base cover
.
About this task
The following image(s) indicate the location of the wireless card and provides a visual representation of the removal procedure.
24
Removing and installing components