Dell Inspiron 16 7610 Service Manual for computers with two fans - Page 18
Steps, Next steps, Install
View all Dell Inspiron 16 7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Steps 1. Lift the Mylar to access the memory-module slot. 2. Align the notch on the memory module with the tab on the memory-module slot on the system board. 3. Slide the memory module into the memory-module slot on the system board. 4. Press down on the memory module till the securing clips click, locking the memory module in place. NOTE: Repeat steps 1 to 4 for each memory module being installed into your computer. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. 18 Removing and installing components
Steps
1.
Lift the Mylar to access the memory-module slot.
2.
Align the notch on the memory module with the tab on the memory-module slot on the system board.
3.
Slide the memory module into the memory-module slot on the system board.
4.
Press down on the memory module till the securing clips click, locking the memory module in place.
NOTE:
Repeat steps 1 to 4 for each memory module being installed into your computer.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
18
Removing and installing components