Dell Inspiron 16 7610 Service Manual for computers with two fans - Page 39

Installing the left fan, Removing the right fan

Get Dell Inspiron 16 7610 PDF manuals and user guides View all Dell Inspiron 16 7610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Installing the left fan Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the left fan and provides a visual representation of the installation procedure. Steps 1. Place the fan on the palm-rest and keyboard assembly. 2. Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x4) that secure the fan to the palm-rest and keyboard assembly. 4. Lift the corner of the Mylar that covers the system board. 5. Connect the fan cable to the system board. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Removing the right fan Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. About this task The following image(s) indicate the location of the right fan and provides a visual representation of the removal procedure. Removing and installing components 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Installing the left fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the left fan and provides a visual representation of the installation procedure.
Steps
1.
Place the fan on the palm-rest and keyboard assembly.
2.
Align the screw holes on the fan with the screw holes on the palm-rest and keyboard assembly.
3.
Replace the two screws (M2x4) that secure the fan to the palm-rest and keyboard assembly.
4.
Lift the corner of the Mylar that covers the system board.
5.
Connect the fan cable to the system board.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
Removing the right fan
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Enter
Service Mode
.
3.
Remove the
base cover
.
About this task
The following image(s) indicate the location of the right fan and provides a visual representation of the removal procedure.
Removing and installing components
39