Dell Inspiron 16 7610 Service Manual for computers with two fans - Page 43

Power-adapter port, Removing the power-adapter port

Get Dell Inspiron 16 7610 PDF manuals and user guides View all Dell Inspiron 16 7610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Steps 1. Place the heat-sink on the system board. 2. Align the screw holes on the heat sink to the screw holes on the system board. 3. In sequential order (1>2>3>4>5>6>7) tighten the seven captive screws that secure the heat sink to the system board. NOTE: The number of screws on the heat sink varies depending on the graphic card configuration ordered. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Power-adapter port Removing the power-adapter port Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. 4. Remove the left fan. 5. Remove the heat sink. About this task The following image(s) indicate the location of the power-adapter port and provides a visual representation of the removal procedure. Removing and installing components 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Steps
1.
Place the heat-sink on the system board.
2.
Align the screw holes on the heat sink to the screw holes on the system board.
3.
In sequential order (1>2>3>4>5>6>7) tighten the seven captive screws that secure the heat sink to the system board.
NOTE:
The number of screws on the heat sink varies depending on the graphic card configuration ordered.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
Power-adapter port
Removing the power-adapter port
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Enter
Service Mode
.
3.
Remove the
base cover
.
4.
Remove the
left fan
.
5.
Remove the
heat sink
.
About this task
The following image(s) indicate the location of the power-adapter port and provides a visual representation of the removal
procedure.
Removing and installing components
43