Dell Inspiron 16 7635 2-in-1 Owners Manual - Page 57

Power button, Removing the power button

Get Dell Inspiron 16 7635 2-in-1 PDF manuals and user guides View all Dell Inspiron 16 7635 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Steps 1. Place the I/O board on the palm-rest and keyboard assembly. 2. Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly. 4. Connect the I/O-board cable to the connector on the I/O board and close the latch. 5. Adhere the tape over the screw on the I/O board. 6. Connect the coin-cell battery to the connector on the I/O board. 7. Connect the power-button board cable to the connector on the I/O board and close the latch. 8. Close the left display hinge and align the screw holes on the left display hinge with the screw holes on the I/O board. 9. Replace the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Power button Removing the power button CAUTION: The information in this section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. Removing and installing Field Replaceable Units (FRUs) 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Steps
1.
Place the I/O board on the palm-rest and keyboard assembly.
2.
Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly.
3.
Replace the two screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
4.
Connect the I/O-board cable to the connector on the I/O board and close the latch.
5.
Adhere the tape over the screw on the I/O board.
6.
Connect the coin-cell battery to the connector on the I/O board.
7.
Connect the power-button board cable to the connector on the I/O board and close the latch.
8.
Close the left display hinge and align the screw holes on the left display hinge with the screw holes on the I/O board.
9.
Replace the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard
assembly.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Power button
Removing the power button
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
Removing and installing Field Replaceable Units (FRUs)
57