Dell Inspiron 16 7635 2-in-1 Owners Manual - Page 59
Prerequisites, About this task, Steps
View all Dell Inspiron 16 7635 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task NOTE: This procedure applies only to computers shipped with a standard power button. The following image(s) indicate the location of the power button and provides a visual representation of the installation procedure. Steps 1. Insert the power button into the slot on the palm-rest and keyboard assembly. 2. Align the screw holes on the power-button board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x3) that secure the power-button board to the palm-rest and keyboard assembly. 4. Connect the power-button board cable to the I/O board and close the latch. 5. Close the left display hinge and align the screw holes on the left display hinge with the screw holes on the palm-rest and keyboard assembly. 6. Replace the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard assembly. Removing and installing Field Replaceable Units (FRUs) 59