Dell Inspiron 16 7635 2-in-1 Owners Manual - Page 62
Removing and installing Field Replaceable Units FRUs, About this task, Steps, Next steps
![]() |
View all Dell Inspiron 16 7635 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
About this task NOTE: This procedure applies only to computers shipped with a power button with fingerprint reader. The following image(s) indicate the location of the power button with fingerprint reader and provides a visual representation of the installation procedure. Steps 1. Using the alignment posts, place the power button with fingerprint reader on the palm-rest and keyboard assembly. 2. Align the screw holes on the power-button board with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x3) that secure the power-button board to the palm-rest and keyboard assembly. 4. Connect the power-button board cable to the I/O board and close the latch. 5. Connect the fingerprint-reader cable to the power-button board and close the latch. 6. Close the left display hinge. 7. Align the screw holes on the left display hinge with the screw holes on the palm-rest and keyboard assembly. 8. Replace the two screws (M2.5x5) and the screw (M2x4) that secure the left display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 62 Removing and installing Field Replaceable Units (FRUs)
![](/manual_guide/products/dell-inspiron-16-7635-2in1-owners-manual-bee1542/62.png)