Dell Inspiron One 2320 Owners Manual - Page 101
Speakers, Removing the Speakers - touch base
View all Dell Inspiron One 2320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
24 Speakers WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). Removing the Speakers 1 Follow the instructions in "Before You Begin" on page 11. 2 Remove the back cover. See "Removing the Back Cover" on page 19. 3 Remove the rear-stand assembly. See "Removing the Rear-Stand Assembly" on page 35. 4 Remove the rear I/O cover. See "Removing the Rear I/O Cover" on page 39. 5 Remove the side I/O cover. See "Removing the Side I/O Cover" on page 41. 6 Remove the system-board shield. See "Removing the System-Board Shield" on page 53. 7 Disconnect the speakers cable from the connector on the system board. 8 Make note of the speakers cable routing and release the cable. 9 Remove the four screws (two on each speaker) that secure the speakers to the chassis. 10 Lift the speakers along with the cable off the chassis. NOTE: The appearance of the system board may vary based on your computer model Speakers 101