Dell Inspiron One 2320 Owners Manual - Page 93
Antenna Module, Removing the Antenna Module
View all Dell Inspiron One 2320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
22 Antenna Module WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). Removing the Antenna Module 1 Follow the instructions in "Before You Begin" on page 11. 2 Remove the back cover. See "Removing the Back Cover" on page 19. 3 Remove the rear-stand assembly. See "Removing the Rear-Stand Assembly" on page 35. 4 Remove the VESA mount. See "Removing the VESA Mount" on page 37. 5 Follow the instructions from step 3 to step 5 in "Removing the Optical Drive" on page 27. 6 Remove the rear I/O cover. See "Removing the Rear I/O Cover" on page 39. 7 Remove the side I/O cover. See "Removing the Side I/O Cover" on page 41. 8 Remove the system-board shield. See "Removing the System-Board Shield" on page 53. 9 Remove the middle frame. See "Removing the Middle Frame" on page 71. 10 Follow instructions in step 8 to step 11 in "Removing the Processor Heat-Sink Fan" on page 75. 11 Disconnect the antenna cables from the connectors on the Mini-Card. 12 Remove the four screws that secure the antenna modules to the chassis. 13 Make a note of the antenna cable routing and release the antenna cable. Antenna Module 93