Dell Inspiron One 2320 Owners Manual - Page 40
Replacing the Rear I/O Cover, Replace the rear-stand assembly. See Replacing the Rear-Stand Assembly
View all Dell Inspiron One 2320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2 1 1 rear I/O cover 2 screws (4) Replacing the Rear I/O Cover 1 Follow the instructions in "Before You Begin" on page 11. 2 Align the screw holes on the rear I/O cover with the screw holes on the chassis. 3 Replace the four screws that secure the rear I/O cover to the chassis. 4 Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly" on page 36. 5 Replace the back cover. See "Replacing the Back Cover" on page 21. CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 6 Connect your computer and all attached devices to electrical outlets, and turn them on. 40 I/O Board Cover
40
I/O Board Cover
Replacing the Rear I/O Cover
1
Follow the instructions in "Before You Begin" on page 11.
2
Align the screw holes on the rear I/O cover with the screw holes on the
chassis.
3
Replace the four screws that secure the rear I/O cover to the chassis.
4
Replace the rear-stand assembly. See "Replacing the Rear-Stand Assembly"
on page 36.
5
Replace the back cover. See "Replacing the Back Cover" on page 21.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
6
Connect your computer and all attached devices to electrical outlets, and
turn them on.
1
rear I/O cover
2
screws (4)
1
2