Dell Latitude 7410 Chromebook Service Manual - Page 32

Removing the 2280 Solid State Drive, SSD

Get Dell Latitude 7410 Chromebook PDF manuals and user guides View all Dell Latitude 7410 Chromebook manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Figure 2. 2230 SSD Steps 1. Install the M.2 2230 SSD to the SSD bracket so that the top side of the SSD (with the sticker) is facing up. 2. Place the thermal plate on top of the SSD covering it completely. 3. Connect the SSD to the M.2 port on the system board and replace the single (M2x2) screw securing it to the system board. Next steps If you are replacing a component, remove the existing component before performing the installation procedure. 1. Reconnect the battery cable. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Removing the 2280 Solid State Drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Disconnect the battery cable. 32 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Figure 2. 2230 SSD
Steps
1.
Install the M.2 2230 SSD to the SSD bracket so that the top side of the SSD (with the sticker) is facing up.
2.
Place the thermal plate on top of the SSD covering it completely.
3.
Connect the SSD to the M.2 port on the system board and replace the single (M2x2) screw securing it to the system board.
Next steps
If you are replacing a component, remove the existing component before performing the installation procedure.
1.
Reconnect the
battery cable
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Removing the 2280 Solid State Drive
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Disconnect the
battery cable
.
32
Disassembly and reassembly