Dell Latitude 7410 Chromebook Service Manual - Page 38
Installing the heatsink assembly
View all Dell Latitude 7410 Chromebook manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Steps 1. Remove the single (M2x2.5) screw from the WLAN bracket and lift it away from the system. NOTE: The fan cable is routed under the WLAN shield plate. It can only be accessed after the bracket is removed. 2. Disconnect the fan cable from the connector on the system board. 3. Remove the five (M2x2.5) screw from the heatsink assembly, then lift and remove the heatsink assembly from the system board. Installing the heatsink assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the heatsink assembly and provide a visual representation of the installation procedure. 38 Disassembly and reassembly
Steps
1.
Remove the single (M2x2.5) screw from the WLAN bracket and lift it away from the system.
NOTE:
The fan cable is routed under the WLAN shield plate. It can only be accessed after the bracket is removed.
2.
Disconnect the fan cable from the connector on the system board.
3.
Remove the five (M2x2.5) screw from the heatsink assembly, then lift and remove the heatsink assembly from the system
board.
Installing the heatsink assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the heatsink assembly and provide a visual representation of the installation
procedure.
38
Disassembly and reassembly