Dell Latitude E6430 Owner's Manual - Page 24
Installing the WLAN Card, Removing the Heat Sink
View all Dell Latitude E6430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4. Remove the screw that secures the WLAN card to the computer. 5. Remove the WLAN card from its slot on the system board. Installing the WLAN Card 1. Insert the WLAN card into its connector at a 45-degree angle into its slot. 2. Connect the antenna cables to their respective connectors marked on the WLAN card. 3. Tighten the screw to secure the WLAN card to the computer. 4. Install: a) base cover b) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the Heat Sink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: 24
4.
Remove the screw that secures the WLAN card to the computer.
5.
Remove the WLAN card from its slot on the system board.
Installing the WLAN Card
1.
Insert the WLAN card into its connector at a 45–degree angle into its slot.
2.
Connect the antenna cables to their respective connectors marked on the WLAN card.
3.
Tighten the screw to secure the WLAN card to the computer.
4.
Install:
a)
base cover
b)
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heat Sink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
24