Dell Latitude E6430 Owner's Manual - Page 31
Installing the Media Board, Removing the Power-Connector Port
View all Dell Latitude E6430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Installing the Media Board 1. Place the media board in its compartment. 2. Tighten the screws to secure the media board. 3. Connect the media board cable to the system board. 4. Install: a) palmrest b) display assembly c) keyboard d) keyboard trim e) bluetooth card f) hard drive g) base cover h) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the Power-Connector Port 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) base cover 3. Disconnect the power-connector cable from the system board. 4. Remove the screw that secures the power-connector bracket to the computer. 31
Installing the Media Board
1.
Place the media board in its compartment.
2.
Tighten the screws to secure the media board.
3.
Connect the media board cable to the system board.
4.
Install:
a)
palmrest
b)
display assembly
c)
keyboard
d)
keyboard trim
e)
bluetooth card
f)
hard drive
g)
base cover
h)
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Power-Connector Port
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
b)
base cover
3.
Disconnect the power-connector cable from the system board.
4.
Remove the screw that secures the power-connector bracket to the computer.
31