Dell Latitude E6430 Owner's Manual - Page 45

Installing the System Board, Removing the Display Assembly

Get Dell Latitude E6430 PDF manuals and user guides View all Dell Latitude E6430 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Installing the System Board 1. Place the system board on the chassis. 2. Tighten the screws to secure the system board to the computer. 3. Connect the media board cable. 4. Flip the computer and connect the following cables to the system board: a) speaker b) coin-cell battery c) LVDS 5. Tighten the screw to secure the LVDS cable bracket. 6. Install the: a) ExpressCard cage b) media board c) palmrest d) display assembly e) keyboard f) keyboard trim g) bluetooth card h) optical drive i) hard drive j) base cover k) battery 7. Follow the procedures in After Working Inside Your Computer. Removing the Display Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) base cover c) keyboard trim d) keyboard 3. Remove the screw that secures the support bracket to the computer. 4. Remove the support bracket from the computer. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Installing the System Board
1.
Place the system board on the chassis.
2.
Tighten the screws to secure the system board to the computer.
3.
Connect the media board cable.
4.
Flip the computer and connect the following cables to the system board:
a)
speaker
b)
coin-cell battery
c)
LVDS
5.
Tighten the screw to secure the LVDS cable bracket.
6.
Install the:
a)
ExpressCard cage
b)
media board
c)
palmrest
d)
display assembly
e)
keyboard
f)
keyboard trim
g)
bluetooth card
h)
optical drive
i)
hard drive
j)
base cover
k)
battery
7.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
b)
base cover
c)
keyboard trim
d)
keyboard
3.
Remove the screw that secures the support bracket to the computer.
4.
Remove the support bracket from the computer.
45