Dell Latitude E6430 Owner's Manual - Page 50
Installing the Display Panel, Removing the Display-Hinge Caps
View all Dell Latitude E6430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
5. Peel off the LVDS cable connector tape and disconnect the LVDS cable from the display panel. 6. Remove the display panel from the display assembly. Installing the Display Panel 1. Connect the LVDS cable and stick the LVDS cable connector tape. 2. Flip the display and place it in the display assembly. 3. Tighten the screws to secure the display panel to the display assembly. 4. Install: a) display bezel b) display assembly c) battery 5. Follow the procedures in After Working Inside Your Computer. Removing the Display-Hinge Caps 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: 50
5.
Peel off the LVDS cable connector tape and disconnect the LVDS cable from the display panel.
6.
Remove the display panel from the display assembly.
Installing the Display Panel
1.
Connect the LVDS cable and stick the LVDS cable connector tape.
2.
Flip the display and place it in the display assembly.
3.
Tighten the screws to secure the display panel to the display assembly.
4.
Install:
a)
display bezel
b)
display assembly
c)
battery
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Display-Hinge Caps
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
50