Dell Latitude E6430 Owner's Manual - Page 32
Installing the Power-Connector Port
View all Dell Latitude E6430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
5. Remove the power-connector bracket from the computer. 6. Remove the power-connector cable from the computer. Installing the Power-Connector Port 1. Connect the power-connector cable to the computer. 2. Install the power-connector bracket to its position in the computer. 3. Tighten the screw to secure the power-connector bracket to the computer. 4. Connect the power-connector cable to the system board. 5. Install: a) base cover b) battery 6. Follow the procedures in After Working Inside Your Computer. 32
5.
Remove the power-connector bracket from the computer.
6.
Remove the power-connector cable from the computer.
Installing the Power-Connector Port
1.
Connect the power-connector cable to the computer.
2.
Install the power-connector bracket to its position in the computer.
3.
Tighten the screw to secure the power-connector bracket to the computer.
4.
Connect the power-connector cable to the system board.
5.
Install:
a)
base cover
b)
battery
6.
Follow the procedures in
After Working Inside Your Computer
.
32