Dell N3200-ON Networking N-Series Switches User Guide version 6.8.0 - Page 110

The Dell Networking N1148-ON front panel provides 48 10/100/1000BASE-T Ethernet RJ-45 ports capable of full-duplex and half-duplex operation, and four SFP+ ports. The N1148P-ON supports 12 PoE+ or 24 PoE ports on Gigabit Ethernet ports 1-24. Dell-qualified SFP+ transceivers are sold separately. Figure 3-1. Dell Networking N1108P-ON Switch (Front Panel) 8 10/100/1000BASE-T Ports USB Port Console Port 2 SFP Ports 2 100/1000BASE-T Uplink Ports Figure 3-2. Dell Networking N1148P-ON Switch (Front Panel) Console Port USB Port 24 10/100/1000BASE-T Ports 4 SFP+ Ports 24 10/100/1000BASE-T Ports Console Port The console port provides serial communication capabilities, which allows communication using RS-232 protocol. The micro-USB port provides a direct connection to the switch and allows access to the CLI from a console terminal connected to the port through the provided USB cable (with a male USB micro B to male USB type A connector). The console port is separately configurable and can be run as an asynchronous link from 1200 baud to 115,200 baud. The Dell CLI supports changing only the speed of the console port. The defaults are 115,200 baud, 8 data bits, no parity, 1 stop bit, and no flow control. 110 Hardware Overview